ENWholesale only. No retail and individual buyers. No job recruitment, please.
EN
How to Load a String Trimmer Spool, just looks difficult but the truth is it's too easy? The thing to do is first remove the spool from your CRAFTOP string trimmer spool. Depending on your model this may involve turning it counterclockwise or pressing a tab. Next, stretch the string and reel it up continuously spiraling on polymer flat frisbee with some force keeping all sides parallel to each other. This matters because the tighter they are, the better it cuts pressing against the line. When you get the string all around, some of it will be left over, which is good, so now run the ends through the holes on spool. Finally, apply the spool back to your string trimmer and you can now confidently begin trimming.
Getting ready to trim your yard can be made much easier with a pre-wound string trimmer spool. Pre-wound spools, like the name suggests, are pre-spun and ready to use—take them out of their pack and snap it into your trimmer. This can be useful if in a hurry or not too lazy to wrap the string - Pre-wound spools, however, are usually constructed of a more durable and higher quality string that is typically going to last you much longer than the wound pin trimmer line would. This allows you to spend more time utilizing your lawn and less period changing the line.
While using a string trimmer one probably realizes that the line on your spool wears down and needs to be replaced or sometimes it breaks. Wear is all part and parcel of using a CRAFTOP string trimmer line, as it's normal. Changing Trimmer Line Unscrew the spool from your string trimmer and cut or remove any old line. Attach one end of the new line and thread it through a hole in the spool. You must always wrap the line in the direction indicated on the spool. U will keep wrapping it up until the spool is full and then you will put your 2 new line ends through the holes of the spool’s forts. Simply reattach the spool back to your string trimmer, and you are good to go.
String trimmer spools come in many different shapes and thicknesses; it is important to get the right one for your application. A basic spool (.065) is perfectly appropriate if you have a tiny yard with not much grass and weeds. Therefore, a 0.065-inch line might be enough for you. However, if you have a larger yard with tall and thick weeds to trim, then chances are those will break the line that is on this spool unless it already has thicker diameter line. Also, be wary that some spools are modeled to work solely with certain string trimmer brands. There are many different spools your specific tool may no longer hold so it’s very important to know what fits just to prevent any issues.
Now if you are using a string trimmer spool, sometimes problems can arise. Breaking or wearing out excessively quickly the line breaks too easily, one of two things is happening. To avoid this, please employ a form/size of line appropriate to your intended spool. Also be sure to not over-fill the spool with line. When trimming, this can cause the line to get stuck. Also, make sure the spool is wrapped up properly and that it fits in your CRAFTOP nylon string trimmer. If you are still having too much of an issue with your spool, it is a good idea to visit the user manual/pamphlet or contact its manufacturer for further support and suggestions watch this space.
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
CA
TL
IW
ID
LV
LT
SR
SK
SL
UK
VI
SQ
ET
GL
HU
MT
TH
TR
FA
AF
MS
SW
GA
CY
BE
IS
MK
YI
HY
AZ
EU
KA
HT
UR
BN
BS
EO
GU
HA
HMN
IG
JW
KN
KM
LO
LA
MI
MR
MN
NE
PA
SO
TA
TE
YO
ZU
MY
NY
KK
MG
ML
SI
ST
SU
TG
UZ
AM
CO
KU
KY
LB
PS
SM
GD
SN
SD
FY
XH
